eduardo.julio@tecnico.ulisboa.pt
+351 218 418 258
+351 218 497 650

Eduardo Nuno Brito Santos Júlio

Full Professor

Activity domain: Structural concrete

  1. structural assessment and monitoring;
  2. advanced structural modelling and risk analysis;
  3. structural connections and localized strengthening; 
  4. eco-efficient and ultra-high performance cementitious materials

Institution

  • Instituto Superior Técnico

Department

  • DECivil

Research Group

  • Structures and Geotechnics

Publications

ReferenceJournalAUTHOR(S) CERISDATE
Ghafari, E.; Costa, H.; Júlio, E.N.B.S.; Portugal, A.; Durães, L. (2014) The effect of nanosilica addition on flowability, strength and transport properties of ultra high performance concrete. Materials & Design, 59. pp 1-9. doi: 10.1016/j.matdes.2014.02.051 Materials & Design
Hugo Sérgio Sousa Costa
Eduardo Nuno Brito Santos Júlio
2014
Baghi, H.; Oliveira, A.; Cavaco, E.; Neves, L.; Júlio, E. (2018) Behavior of reinforced concrete frame with masonry infill wall subjected to vertical load. Engineering Structures, 171. pp 476-487. doi: 10.1016/j.engstruct.2018.06.001 Engineering Structures
Eduardo Nuno Brito Santos Júlio
Eduardo Soares Ribeiro Gomes Cavaco
2018
Duarte, A.P.C.; Silva, B.A.; Silvestre, N.; de Brito, J.; Júlio, E. (2015) Mechanical characterization of rubberized concrete using an Image-Processing / XFEM coupled procedure. Composites Part B: Engineering, 78. pp 214-226. doi: 10.1016/j.compositesb.2015.03.082 Composites Part B: Engineering
Jorge Manuel Caliço Lopes de Brito
Eduardo Nuno Brito Santos Júlio
2015
Duarte, A.P.C.; Silva, B.A.; Silvestre, N.; de Brito, J.; Júlio, E.; Castro, J.M. (2016) Tests and design of short steel tubes filled with rubberised concrete. Engineering Structures, 112. pp 274-286. doi: 10.1016/j.engstruct.2016.01.018 Engineering Structures
Jorge Manuel Caliço Lopes de Brito
Eduardo Nuno Brito Santos Júlio
2016
Ferreira, L.F.B.; Costa, H.S.S.; Barata, I.I.A.; Júlio, E.N.B.S.; Tiago, P.N.M.; Coelho, J.F.J. (2014) Precast alkali-activated concrete towards sustainable construction. Magazine of Concrete Research, 66, n.º 12. pp 618-626. doi: 10.1680/macr.13.00091 Magazine of Concrete Research
Luis Filipe Brandão Ferreira
Luis Filipe Brandão Ferreira
Hugo Sérgio Sousa Costa
Eduardo Nuno Brito Santos Júlio
2014
Santos, P.M.D.; Júlio, E.N.B.S. (2014) Interface shear transfer on composite concrete members. ACI Structural Journal, 111, n.º 1. pp 113-121. ACI Structural Journal
Pedro M.D. Santos
Eduardo Nuno Brito Santos Júlio
2014
Simões, T.; Octávio, C.; Valença, J.; Costa, H.; Dias-da-Costa, D.; Júlio, E. (2017) Influence of concrete strength and steel fibre geometry on the fibre/matrix interface. Composites Part B: Engineering, 122. pp 156-164. doi: 10.1016/j.compositesb.2017.04.010 Composites Part B: Engineering
Hugo Sérgio Sousa Costa
Eduardo Nuno Brito Santos Júlio
2017
Valença, J.; Almeida, C.; Botas, J.; Júlio, E.N.B.S. (2015) Patch Restoration Method: A new concept for concrete heritage. Construction and Building Materials, 101, Part 1. pp 643-651. doi: 10.1016/j.conbuildmat.2015.10.055 Construction and Building Materials
Eduardo Nuno Brito Santos Júlio
2015
Valença, J.; Júlio, E.; Puente, I.; González-Jorge, H. (2016) The MCrack-TLS Method for Assessing Cracks on Concrete Bridges based on Image Processing and Laser Scanning. Stockholm, Sweden:
Jónatas Miguel de Almeida Valença
Eduardo Nuno Brito Santos Júlio
2016
Duarte, A.P.C.; Silvestre, N.; de Brito, J.; Júlio, E. (2017) Numerical study of the compressive mechanical behaviour of rubberized concrete using the eXtended Finite Element Method (XFEM). Composite Structures, 179. pp 132-145. doi: 10.1016/j.compstruct.2017.07.048 Composite Structures
Jorge Manuel Caliço Lopes de Brito
Eduardo Nuno Brito Santos Júlio
2017
Ceia, F.; Raposo, J.; Guerra, M.; Júlio, E.; de Brito, J. (2016) Shear strength of recycled aggregate concrete to natural aggregate concrete interfaces. Construction and Building Materials, 109. pp 139-145. doi: 10.1016/j.conbuildmat.2016.02.002 Construction and Building Materials
Jorge Manuel Caliço Lopes de Brito
Eduardo Nuno Brito Santos Júlio
2016
Valença, J.; Gonçalves, L.M.S.; Júlio, E.N.B.S. (2013) Damage assessment on concrete surfaces using multi-spectral image analysis. Construction and Building Materials, 40. pp 971-981. doi: 10.1016/j.conbuildmat.2012.11.061 Construction and Building Materials
Eduardo Nuno Brito Santos Júlio
2013
Carmo, R.N.F. do; Costa, H.; Júlio, E. (2017) Influence of nanoparticles additions on the bond between steel fibres and the binding paste. Construction and Building Materials, 151. pp 312-318. doi: 10.1016/j.conbuildmat.2017.06.085 Construction and Building Materials
Ricardo Nuno Francisco do Carmo
Hugo Sérgio Sousa Costa
Eduardo Nuno Brito Santos Júlio
2017
Simões, T.; Costa, H.; Dias-da-Costa, D.; Júlio, E. (2018) Influence of type and dosage of micro-fibres on the physical properties of fibre reinforced mortar matrixes. Construction and Building Materials, 187. pp 1277-1285. doi: 10.1016/j.conbuildmat.2018.08.058 Construction and Building Materials
Hugo Sérgio Sousa Costa
Eduardo Nuno Brito Santos Júlio
2018
Ghafari, E.; Júlio, E.N.B.S.; Costa, H. (2015) Statistical mixture design approach for eco-efficient UHPC. Cement and Concrete Composites, 55. pp 17-25. doi: 10.1016/j.cemconcomp.2014.07.016 Cement and Concrete Composites
Hugo Sérgio Sousa Costa
Eduardo Nuno Brito Santos Júlio
2015
Santos, P.M.D.; Júlio, E.N.B.S. (2013) A state-of-the-art review on roughness quantification methods for concrete surfaces. Construction and Building Materials, 38. pp 912-923. doi: 10.1016/j.conbuildmat.2012.09.045 Construction and Building Materials
Pedro M.D. Santos
Eduardo Nuno Brito Santos Júlio
2013
Ribeiro, F.; Sena-Cruz, J.; Branco, F.G.; Júlio, E. (2018) Hybrid effect and pseudo-ductile behaviour of unidirectional interlayer hybrid FRP composites for civil engineering applications. Construction and Building Materials, 171. pp 871-890. doi: 10.1016/j.conbuildmat.2018.03.144 Construction and Building Materials
Eduardo Nuno Brito Santos Júlio
2018
Ghafari, E.; Bandarabadi, M.; Costa, H.; Júlio, E. (2015) Prediction of fresh and hardened state properties of UHPC: Comparative study of statistical mixture design and an artificial neural network model. Journal of Materials in Civil Engineering, 27, n.º 11. doi: 10.1061/(ASCE)MT.1943-5533.0001270 Journal of Materials in Civil Engineering
Hugo Sérgio Sousa Costa
Eduardo Nuno Brito Santos Júlio
2015
Godinho, L.; Dias-da-Costa, D.; Areias, P.; Júlio, E.N.B.S.; Soares Jr., D. (2013) Numerical study towards the use of a SH wave ultrasonic-based strategy for crack detection in concrete structures. Engineering Structures, 49. pp 782-791. doi: 10.1016/j.engstruct.2012.12.019 Engineering Structures
Pedro Miguel de Almeida Areias
Eduardo Nuno Brito Santos Júlio
2013
Duarte, A.P.C.; Silvestre, N.; de Brito, J.; Júlio, E.; Silvestre, J.D. (2018) On the sustainability of rubberized concrete filled square steel tubular columns. Journal of Cleaner Production, 170. pp 510-521. doi: 10.1016/j.jclepro.2017.09.131 Journal of Cleaner Production
José Dinis Silvestre
Jorge Manuel Caliço Lopes de Brito
Eduardo Nuno Brito Santos Júlio
2018
Guerra, M.; Ceia, F.; de Brito, J.; Júlio, E. (2014) Anchorage of steel rebars to recycled aggregates concrete. Construction and Building Materials, 72. pp 113-123. doi: 10.1016/j.conbuildmat.2014.08.081 Construction and Building Materials
Jorge Manuel Caliço Lopes de Brito
Eduardo Nuno Brito Santos Júlio
2014
Costa, H.; Carmo, R.N.F.; Júlio, E. (2018) Influence of lightweight aggregates concrete on the bond strength of concrete-to-concrete interfaces. Construction and Building Materials, 180. pp 519-530. doi: 10.1016/j.conbuildmat.2018.06.011 Construction and Building Materials
Hugo Sérgio Sousa Costa
Eduardo Nuno Brito Santos Júlio
2018
Ghafari, E.; Costa, H.; Júlio, E.N.B.S. (2014) RSM-based model to predict the performance of self-compacting UHPC reinforced with hybrid steel micro-fibers. Construction and Building Materials, 66. pp 375-383. doi: 10.1016/j.conbuildmat.2014.05.064 Construction and Building Materials
Hugo Sérgio Sousa Costa
Eduardo Nuno Brito Santos Júlio
2014
Barata, I.; Fonseca, A.C.; Costa, C.S.M.F.; Ferreira, L.; Júlio, E.; Coelho, J.F.J. (2014) Insights into the thermo-mechanical properties of films cast from emulsion terpolymers. Progress in Organic Coatings, 77, n.º 4. pp 790-797. doi: 10.1016/j.porgcoat.2014.01.005 Progress in Organic Coatings
Eduardo Nuno Brito Santos Júlio
2014
Duarte, A.P.C.; Silva, B.A.; Silvestre, N.; de Brito, J.; Júlio, E.; Castro, J.M. (2016) Experimental study on short rubberized concrete-filled steel tubes under cyclic loading. Composite Structures, 136. pp 394-404. doi: 10.1016/j.compstruct.2015.10.015 Composite Structures
Jorge Manuel Caliço Lopes de Brito
Eduardo Nuno Brito Santos Júlio
2016
Octávio, C.; Dias-da-Costa, D.; Alfaiate, J.; Júlio, E. (2016) Modelling the behaviour of steel fibre reinforced concrete using a discrete strong discontinuity approach. Engineering Fracture Mechanics, 154. pp 12-23. doi: 10.1016/j.engfracmech.2016.01.006 Engineering Fracture Mechanics
Jorge Manuel Vinagre Alfaiate
Eduardo Nuno Brito Santos Júlio
2016
Santos, P.; Martins, C.; Júlio, E.N.B.S. (2015) Enhancement of the thermal performance of perforated clay brick walls through the addition of industrial nano-crystalline aluminium sludge. Construction and Building Materials, 101, Part 1. pp 227-238. doi: 10.1016/j.conbuildmat.2015.10.058 Construction and Building Materials
Eduardo Nuno Brito Santos Júlio
2015
Ferreira, L.; Branco, F.G.; Costa, H.S.S.; Júlio, E.; Maranha, P. (2015) Characterization of alkali-activated binders using the maturity method. Construction and Building Materials, 95. pp 337-344. doi: 10.1016/j.conbuildmat.2015.07.068 Construction and Building Materials
Hugo Sérgio Sousa Costa
Eduardo Nuno Brito Santos Júlio
2015
Ghafari, E.; Ghahari, S.A.; Costa, H.; Júlio, E.N.B.S.; Portugal, A.; Durães, L. (2016) Effect of supplementary cementitious materials on autogenous shrinkage of ultra-high performance concrete. Construction and Building Materials, 127. pp 43-48. doi: 10.1016/j.conbuildmat.2016.09.123 Construction and Building Materials
Hugo Sérgio Sousa Costa
Eduardo Nuno Brito Santos Júlio
2016
Valença, J.; Dias-da-Costa, D.; Gonçalves, L.; Júlio, E.N.B.S.; Araújo, H. (2014) Automatic concrete health monitoring: assessment and monitoring of concrete surfaces. Structure and Infrastructure Engineering, 10, n.º 12. pp 1547-1554. doi: 10.1080/15732479.2013.835326 Structure and Infrastructure Engineering
Eduardo Nuno Brito Santos Júlio
2014
Valença. J.; Puente, I.; Júlio, E.; González-Jorge, H.; Arias-Sánchez, P. (2017) Assessment of cracks on concrete bridges using image processing supported by laser scanning survey. Construction and Building Materials, 146. pp 668-678. doi: 10.1016/j.conbuildmat.2017.04.096 Construction and Building Materials
Jónatas Miguel de Almeida Valença
Eduardo Nuno Brito Santos Júlio
2017
Ribeiro, F.; Sena-Cruz, J.; Branco, F.G.; Júlio, E. (2018) Hybrid FRP jacketing for enhanced confinement of circular concrete columns in compression. Construction and Building Materials, 184. pp 681-704. doi: 10.1016/j.conbuildmat.2018.06.229 Construction and Building Materials
Eduardo Nuno Brito Santos Júlio
2018
Duarte, A.P.C.; Silva, B.A.; Silvestre, N.; de Brito, J.; Júlio, E.; Castro, J.M. (2016) Finite element modelling of short steel tubes filled with rubberized concrete. Composite Structures, 150. pp 28-40. doi: 10.1016/j.compstruct.2016.04.048 Composite Structures
Jorge Manuel Caliço Lopes de Brito
Eduardo Nuno Brito Santos Júlio
2016
Ghafari, E.; Costa, H.; Júlio, E.N.B.S. (2015) Critical review on eco-efficient ultra high performance concrete enhanced with nano-materials. Construction and Building Materials, 101, Part 1. pp 201-208. doi: 10.1016/j.conbuildmat.2015.10.066 Construction and Building Materials
Hugo Sérgio Sousa Costa
Eduardo Nuno Brito Santos Júlio
2015
Valença, J.; Puente, I.; Júlio, E. (2016) CrackBri − Innovative method for assessing cracks on concrete bridges based on image processing and laser-scanning. Stockholm, Sweden:
Jónatas Miguel de Almeida Valença
Eduardo Nuno Brito Santos Júlio
2016
Simões, T.; Costa, H.; Dias-da-Costa, D.; Júlio, E. (2017) Influence of fibres on the mechanical behaviour of fibre reinforced concrete matrixes. Construction and Building Materials, 137. pp 548-556. doi: 10.1016/j.conbuildmat.2017.01.104 Construction and Building Materials
Hugo Sérgio Sousa Costa
Eduardo Nuno Brito Santos Júlio
2017
Gomes, S.; Dias-da-Costa, D.; Neves, L.A.C.; Hadigheh, S.A.; Fernandes, P.; Júlio, E. (2018) Probabilistic-based characterisation of the mechanical properties of CFRP laminates. Construction and Building Materials, 169. pp 132-141. doi: 10.1016/j.conbuildmat.2018.02.190 Construction and Building Materials
Eduardo Nuno Brito Santos Júlio
2018
Duarte, A.; Silva, B.; Silvestre, N.; de Brito, J.; Júlio, E.; Castro, J. (2016) Finite element modeling of short RuCFST. Cape Town, South Africa:
Jorge Manuel Caliço Lopes de Brito
Eduardo Nuno Brito Santos Júlio
2016
Dias-da-Costa, D.; Valença, J.; Júlio, E.; Araújo, H. (2017) Crack propagation monitoring using an image deformation approach. Structural Control Health Monitoring, 24, n.º 10. doi: 10.1002/stc.1973 Structural Control Health Monitoring
Eduardo Nuno Brito Santos Júlio
2017
Costa, H.; Carmo, R.N.F.; Júlio, E. (2018) Influence of normal stress and reinforcement ratio on the behavior of LWAC interfaces. Construction and Building Materials, 192. pp 317-329. doi: 10.1016/j.conbuildmat.2018.10.116 Construction and Building Materials
Hugo Sérgio Sousa Costa
Eduardo Nuno Brito Santos Júlio
2018
Valença, J.; Dias-da-Costa, D.; Júlio, E.N.B.S.; Araújo, H.; Costa, H. (2013) Automatic crack monitoring using photogrammetry and image processing. Measurement, 46, n.º 1. pp 433-441. doi: 10.1016/j.measurement.2012.07.019 Measurement
Hugo Sérgio Sousa Costa
Eduardo Nuno Brito Santos Júlio
2013
Trino, A.S.M.; Costa, C.S.M.F.; Fonseca, A.C.; Barata, I.; Júlio, E.; Serra, A.C.; Coelho, J.F.J. (2016) Novel composites from green unsaturated polyesters and fly ashes: Preparation and characterization. Reactive and Functional Polymers, 106. pp 24-31. doi: 10.1016/j.reactfunctpolym.2016.07.004 Reactive and Functional Polymers
Eduardo Nuno Brito Santos Júlio
2016
Saldanha, R.; Júlio, E.N.B.S.; Dias-da-Costa, D.; Santos, P. (2013) A modified slant shear test designed to enforce adhesive failure. Construction and Building Materials, 41. pp 673-680. doi: 10.1016/j.conbuildmat.2012.12.053 Construction and Building Materials
Eduardo Nuno Brito Santos Júlio
2013
Silva, J.V.; Ismael, R.; Carmo, R.N.F.; Lourenço, C.; Soldado, E.; Costa, H.; Júlio, E. (2016) Influence of nano-SiO2 and nano-Al2O3 additions on the shear strength and the bending moment capacity of RC beams. Construction and Building Materials, 123. pp 45-56. doi: 10.1016/j.conbuildmat.2016.06.132 Construction and Building Materials
Hugo Sérgio Sousa Costa
Eduardo Nuno Brito Santos Júlio
2016
Ghafari, E.; Arezoumandi, M.; Costa, H.; Júlio, E.N.B.S. (2015) Influence of nano-silica addition in the durability of UHPC. Construction and Building Materials, 94. pp 181-188. doi: 10.1016/j.conbuildmat.2015.07.009 Construction and Building Materials
Hugo Sérgio Sousa Costa
Eduardo Nuno Brito Santos Júlio
2015
Ismael, R.; Silva, J.V.; Carmo, R.N.F.; Soldado, E.; Lourenço, C.; Costa, H.; Júlio, E. (2016) Influence of nano-SiO2 and nano-Al2O3 additions on steel-to-concrete bonding. Construction and Building Materials, 125. pp 1080-1092. doi: 10.1016/j.conbuildmat.2016.08.152 Construction and Building Materials
Hugo Sérgio Sousa Costa
Eduardo Nuno Brito Santos Júlio
2016
Dias-da-Costa, D.; Alfaiate, J.; Sluys, L.; Areias, P.; Júlio, E. (2013) An embedded formulation with conforming finite elements to capture strong discontinuities. International Journal for Numerical Methods in Engineering, 93, n.º 2. pp 224-244. doi: 10.1002/nme.4393 International Journal for Numerical Methods in Engineering
Pedro Miguel de Almeida Areias
Jorge Manuel Vinagre Alfaiate
Eduardo Nuno Brito Santos Júlio
2013